# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
#	           ChangeSet	1.676.14.28 -> 1.676.14.29
#	     kernel/printk.c	1.9     -> 1.10   
#	Documentation/Configure.help	1.128.5.1 -> 1.128.5.2
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 02/09/27	bjorn_helgaas@hp.com	1.676.14.29
# ia64 early printk.
# --------------------------------------------
#
diff -Nru a/Documentation/Configure.help b/Documentation/Configure.help
--- a/Documentation/Configure.help	Wed Oct  8 09:07:27 2003
+++ b/Documentation/Configure.help	Wed Oct  8 09:07:27 2003
@@ -25133,12 +25133,31 @@
   and restore instructions.  It's useful for tracking down spinlock
   problems, but slow!  If you're unsure, select N.
 
-Early printk support (requires VGA!)
+Early printk support
 CONFIG_IA64_EARLY_PRINTK
-  Selecting this option uses the VGA screen for printk() output before
-  the consoles are initialised.  It is useful for debugging problems
-  early in the boot process, but only if you have a VGA screen
-  attached.  If you're unsure, select N.
+  Selecting this option uses a UART or VGA screen (or both) for
+  printk() output before the consoles are initialised.  It is useful
+  for debugging problems early in the boot process, but only if you
+  have a serial terminal or a VGA screen attached.  If you're unsure,
+  select N.
+
+Early printk on serial port
+CONFIG_IA64_EARLY_PRINTK_UART
+  Select this option to use a serial port for early printk() output.
+  You must also select either CONFIG_IA64_EARLY_PRINTK_UART_BASE or
+  CONFIG_SERIAL_HCDP.  If you select CONFIG_SERIAL_HCDP, early
+  printk() output will appear on the first console device described by
+  the HCDP.  If you set CONFIG_IA64_EARLY_PRINTK_UART_BASE, the HCDP
+  will be ignored.
+
+UART base address
+CONFIG_IA64_EARLY_PRINTK_UART_BASE
+  The physical MMIO address of the UART to use for early printk().
+  This overrides any UART located using the EFI HCDP table.
+
+Early printk on VGA
+CONFIG_IA64_EARLY_PRINTK_VGA
+  Select this option to use VGA for early printk() output.
 
 Print possible IA64 hazards to console
 CONFIG_IA64_PRINT_HAZARDS
diff -Nru a/kernel/printk.c b/kernel/printk.c
--- a/kernel/printk.c	Wed Oct  8 09:07:27 2003
+++ b/kernel/printk.c	Wed Oct  8 09:07:27 2003
@@ -326,6 +326,12 @@
 			__call_console_drivers(start, end);
 		}
 	}
+#ifdef CONFIG_IA64_EARLY_PRINTK
+	if (!console_drivers) {
+		static void early_printk (const char *str, size_t len);
+		early_printk(&LOG_BUF(start), end - start);
+	}
+#endif
 }
 
 /*
@@ -685,3 +691,101 @@
 		tty->driver.write(tty, 0, msg, strlen(msg));
 	return;
 }
+
+#ifdef CONFIG_IA64_EARLY_PRINTK
+
+#include <asm/io.h>
+
+#ifdef CONFIG_IA64_EARLY_PRINTK_UART
+
+#include <linux/serial_reg.h>
+#include <asm/system.h>
+
+static void early_printk_uart(const char *str, size_t len)
+{
+	static char *uart = 0;
+	unsigned long uart_base;
+	char c;
+
+	if (!uart) {
+#ifdef CONFIG_SERIAL_HCDP
+		extern unsigned long hcdp_early_uart(void);
+		uart_base = hcdp_early_uart();
+#endif
+#if CONFIG_IA64_EARLY_PRINTK_UART_BASE
+		uart_base = CONFIG_IA64_EARLY_PRINTK_UART_BASE;
+#endif
+		if (uart_base)
+			uart = ioremap(uart_base, 64);
+	}
+
+	if (!uart)
+		return;
+
+	while (len-- > 0) {
+		c = *str++;
+		while (!(UART_LSR_TEMT & readb(uart + UART_LSR)))
+			; /* spin */
+
+		writeb(c, uart + UART_TX);
+
+		if (c == '\n')
+			writeb('\r', uart + UART_TX);
+	}
+}
+#endif /* CONFIG_IA64_EARLY_PRINTK_UART */
+
+#ifdef CONFIG_IA64_EARLY_PRINTK_VGA
+
+#define VGABASE		((char *)0xc0000000000b8000)
+#define VGALINES	24
+#define VGACOLS		80
+
+static int current_ypos = VGALINES, current_xpos = 0;
+
+static void early_printk_vga(const char *str, size_t len)
+{
+	char c;
+	int  i, k, j;
+
+	while (len-- > 0) {
+		c = *str++;
+		if (current_ypos >= VGALINES) {
+			/* scroll 1 line up */
+			for (k = 1, j = 0; k < VGALINES; k++, j++) {
+				for (i = 0; i < VGACOLS; i++) {
+					writew(readw(VGABASE + 2*(VGACOLS*k + i)),
+					       VGABASE + 2*(VGACOLS*j + i));
+				}
+			}
+			for (i = 0; i < VGACOLS; i++) {
+				writew(0x720, VGABASE + 2*(VGACOLS*j + i));
+			}
+			current_ypos = VGALINES-1;
+		}
+		if (c == '\n') {
+			current_xpos = 0;
+			current_ypos++;
+		} else if (c != '\r')  {
+			writew(((0x7 << 8) | (unsigned short) c),
+			       VGABASE + 2*(VGACOLS*current_ypos + current_xpos++));
+			if (current_xpos >= VGACOLS) {
+				current_xpos = 0;
+				current_ypos++;
+			}
+		}
+	}
+}
+#endif /* CONFIG_IA64_EARLY_PRINTK_VGA */
+
+void early_printk(const char *str, size_t len)
+{
+#ifdef CONFIG_IA64_EARLY_PRINTK_UART
+	early_printk_uart(str, len);
+#endif
+#ifdef CONFIG_IA64_EARLY_PRINTK_VGA
+	early_printk_vga(str, len);
+#endif
+}
+
+#endif /* CONFIG_IA64_EARLY_PRINTK */